WEBVTT

1
00:00:00.000 --> 00:00:05.999
This video shows you how to replace the MarkNet N8450
wireless print server of your printer.

2
00:00:06.000 --> 00:00:12.999
Turn off the printer.

3
00:00:13.000 --> 00:00:17.999
Unplug the power cord from the electrical outlet, and
then from the printer.

4
00:00:18.000 --> 00:00:40.999
Using a flat-head screwdriver, remove the controller
board shield.

5
00:00:41.000 --> 00:00:43.999
Open door B.

6
00:00:44.000 --> 00:00:51.999
Remove the used wireless print server.

7
00:00:52.000 --> 00:00:55.999
Insert the new wireless print server.

8
00:00:56.000 --> 00:00:58.999
Close door B.

9
00:00:59.000 --> 00:01:07.999
Attach the controller board shield.

10
00:01:08.000 --> 00:01:23.999
Install the screws.

11
00:01:24.000 --> 00:01:26.999
Connect one end of the power cord to the printer.

12
00:01:27.000 --> 00:01:34.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

13
00:01:35.000 --> 09:31:35.999
Turn on the printer.