WEBVTT

1
00:00:00.000 --> 00:00:04.999
This video shows you how to install the intelligent
storage drive on your printer.

2
00:00:05.000 --> 00:00:14.999
Turn off the printer.

3
00:00:15.000 --> 00:00:19.999
Unplug the power cord from the electrical outlet, and
then from the printer.

4
00:00:20.000 --> 00:00:35.999
Using a flat‑head screwdriver, remove the screws from
the controller board shield, and then remove the shield.

5
00:00:36.000 --> 00:00:43.999
Unpack the intelligent storage drive.

6
00:00:44.000 --> 00:00:51.999
Locate the connector, and then insert the card.

7
00:00:52.000 --> 00:01:05.999
Attach the controller board shield, and then install
the screws.

8
00:01:06.000 --> 00:01:09.999
Connect one end of the power cord to the printer.

9
00:01:10.000 --> 00:01:18.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

10
00:01:19.000 --> 09:31:19.999
Turn on the printer.