WEBVTT

1
00:00:00.000 --> 00:00:05.999
This video shows you how to install an internal solutions
port or ISP on your printer.

2
00:00:06.000 --> 00:00:15.999
Turn off the printer.

3
00:00:16.000 --> 00:00:20.999
Unplug the power cord from the electrical outlet, and
then from the printer.

4
00:00:21.000 --> 00:00:35.999
Using a flat-head screwdriver, remove the controller
board shield.

5
00:00:36.000 --> 00:00:44.999
Unpack the ISP kit.

6
00:00:45.000 --> 00:01:04.999
Install the ISP into its housing.

7
00:01:05.000 --> 00:01:36.999
Install the screws on the housing.

8
00:01:39.000 --> 00:02:53.999
Attach the housing to the controller board shield.

9
00:02:54.000 --> 00:03:01.999
Connect the ISP extended cable to the ISP connector
on the controller board.

10
00:03:02.000 --> 00:03:19.999
Attach the controller board shield, and then install
the screws.

11
00:03:20.000 --> 00:03:22.999
Connect one end of the power cord to the printer.

12
00:03:23.000 --> 00:03:31.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

13
00:03:32.000 --> 09:33:32.999
Turn on the printer.