WEBVTT

1
00:00:00.000 --> 00:00:04.999
This video shows you how to replace the color imaging
kit of your printer.

2
00:00:05.000 --> 00:00:19.999
When the color imaging kit needs replacement, an error
message appears on the printer display. Touch More information to know about the error message.

3
00:00:20.000 --> 00:00:23.999
Open door B.

4
00:00:24.000 --> 00:00:29.999
Remove the toner cartridges.

5
00:00:30.000 --> 00:00:32.999
Remove the waste toner bottle.

6
00:00:33.000 --> 00:00:37.999
To avoid spilling the toner, place the bottle in an
upright position.

7
00:00:38.000 --> 00:00:46.999
Disconnect the imaging kit cable, and then remove the
used imaging kit.

8
00:00:47.000 --> 00:00:54.999
Place the imaging kit on a clean flat surface and in
an uplifted position to avoid scratching or damaging the photoconductor drum.

9
00:00:55.000 --> 00:00:59.999
Remove the black imaging unit from the used imaging
kit.

10
00:01:00.000 --> 00:01:07.999
To avoid print quality problems, do not touch the photoconductor
drum, and do not expose it to light for more than 10 minutes.

11
00:01:08.000 --> 00:01:23.999
Unpack the new imaging kit.

12
00:01:24.000 --> 00:01:48.999
Remove the packing material from the new imaging kit.

13
00:01:49.000 --> 00:01:56.999
To avoid print quality problems, do not touch the photoconductor
drums, and do not expose them to light for more than 10 minutes.

14
00:01:57.000 --> 00:02:03.999
Insert the black imaging unit into the new imaging
kit, and then lock it.

15
00:02:04.000 --> 00:02:13.999
Insert the new imaging kit, and then connect the imaging
kit cable.

16
00:02:14.000 --> 00:02:17.999
Insert the waste toner bottle.

17
00:02:18.000 --> 00:02:25.999
Insert the toner cartridges.

18
00:02:26.000 --> 09:32:26.999
Close door B.