WEBVTT

1
00:00:00.000 --> 00:00:03.999
This video shows you how to install the spring retainer
into your printer.

2
00:00:04.000 --> 00:00:07.999
Depending on the model, the appearance of your printer
may vary.

3
00:00:08.000 --> 00:00:15.999
Turn off the printer.

4
00:00:16.000 --> 00:00:20.999
Unplug the power cord from the electrical outlet, and
then from the printer.

5
00:00:21.000 --> 00:00:22.999
The inside of the printer might be hot.

6
00:00:23.000 --> 00:00:27.999
To reduce the risk of injury from a hot surface, allow
the surface to cool before touching it.

7
00:00:28.000 --> 00:00:31.999
 It may take up to 30 minutes for the surface to cool.

8
00:00:32.000 --> 00:00:37.999
Open door C.

9
00:00:38.000 --> 00:00:56.999
With the arrow pointing up, insert the spring retainer
until it clicks into place.

10
00:00:57.000 --> 00:00:59.999
The installation is now complete.

11
00:01:00.000 --> 00:01:02.999
Close door C. 

12
00:01:03.000 --> 00:01:05.999
Connect one end of the power cord to the printer.

13
00:01:06.000 --> 00:01:08.999
To avoid the risk of fire or electrical shock,

14
00:01:09.000 --> 00:01:16.999
connect the other end of the power cord to an appropriately
rated and properly grounded electrical outlet.

15
00:01:17.000 --> 09:31:17.999
Turn on the printer.