WEBVTT

1
00:00:00.000 --> 00:00:04.999
This video shows you how to install the optional 2000-sheet
tray on your printer.

2
00:00:05.000 --> 00:00:09.999
Depending on the model, the appearance of your printer
may vary.

3
00:00:10.000 --> 00:00:18.999
Turn off the printer.

4
00:00:19.000 --> 00:00:25.999
Open the front door, and then turn off the power switch.

5
00:00:26.000 --> 00:00:33.999
Unplug the power cord from the electrical outlet, and
then from the printer.

6
00:00:34.000 --> 00:00:53.999
Open the box, and then remove the optional 2000-sheet
tray.

7
00:00:54.000 --> 00:01:43.999
Unpack the tray.

8
00:01:44.000 --> 00:02:16.999
Unpack the docking bracket.

9
00:02:17.000 --> 00:02:33.999
Remove the leveling screw from the left side of the
printer.

10
00:02:34.000 --> 00:02:53.999
Attach the docking bracket to the printer.

11
00:02:54.000 --> 00:03:01.999
Install the optional tray.

12
00:03:02.000 --> 00:03:08.999
Remove the screw at the bottom of the optional tray.

13
00:03:09.000 --> 00:03:18.999
Turn the leveling screws clockwise to make sure that
the tray has the same height as the printer.

14
00:03:19.000 --> 00:03:23.999
Connect the tray cable to the printer.

15
00:03:24.000 --> 00:03:38.999
Connect one end of the power cord to the printer.

16
00:03:39.000 --> 00:03:47.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

17
00:03:48.000 --> 00:03:53.999
Open the front door, and then turn on the power switch.

18
00:03:54.000 --> 09:33:54.999
If the display is blank, then press the power button
on the control panel.