WEBVTT

1
00:00:00.000 --> 00:00:05.999
This video shows you how to install the staple, hole
punch finisher into your printer.

2
00:00:06.000 --> 00:00:09.999
Depending on the model, the appearance of your printer
may vary.

3
00:00:10.000 --> 00:00:19.999
Turn off the printer.

4
00:00:20.000 --> 00:00:24.999
Open the front door, and then turn off the power switch.

5
00:00:25.000 --> 00:00:35.999
Unplug the power cord from the electrical outlet, and
then from the printer.

6
00:00:36.000 --> 00:00:45.999
Open the box.

7
00:00:46.000 --> 00:00:53.999
Remove the staple, hole punch finisher accessories.

8
00:00:54.000 --> 00:00:56.999
Remove the packaging material.

9
00:00:57.000 --> 00:00:58.999
Remove the paper transport.

10
00:00:59.000 --> 00:01:10.999
Put the box upright, and then remove the finisher.

11
00:01:11.000 --> 00:03:06.999
Remove the packing material from the finisher.

12
00:03:07.000 --> 00:03:49.999
Unpack the paper transport.

13
00:03:50.000 --> 00:04:01.999
Unpack bin 1.

14
00:04:02.000 --> 00:04:22.999
Unpack the finisher accessories.

15
00:04:23.000 --> 00:04:35.999
Insert the staple cartridge holder.

16
00:04:36.000 --> 00:04:44.999
Insert bin 1.

17
00:04:45.000 --> 00:05:07.999
Attach the brackets at the bottom of the finisher.

18
00:05:08.000 --> 00:05:14.999
From the printer, remove the paper bail.

19
00:05:15.000 --> 00:05:20.999
Remove the standard bin.

20
00:05:21.000 --> 00:05:29.999
Open the front door, and then remove the standard bin
side cover.

21
00:05:30.000 --> 00:05:38.999
Insert the paper transport.

22
00:05:39.000 --> 00:05:41.999
Close the front door.

23
00:05:42.000 --> 00:05:50.999
Insert the paper bail that came with the finisher.

24
00:05:51.000 --> 00:06:00.999
Secure the paper transport to the printer.

25
00:06:01.000 --> 00:06:10.999
Remove the network ports cover.

26
00:06:11.000 --> 00:06:19.999
Secure the paper transport cable to the printer.

27
00:06:20.000 --> 00:06:30.999
Insert the network ports cover.

28
00:06:31.000 --> 00:06:35.999
Open the finisher door, and then remove the screw.

29
00:06:36.000 --> 00:06:48.999
Close the finisher door, and then attach the finisher
to the printer.

30
00:06:49.000 --> 00:06:59.999
Open the finisher door, and then secure the finisher
to the printer.

31
00:07:00.000 --> 00:07:12.999
Turn the leveling screws clockwise to make sure that
all sides of the finisher have the same height as the printer.

32
00:07:13.000 --> 00:07:16.999
Remove the connector cover at the rear of the finisher.

33
00:07:17.000 --> 00:07:25.999
Attach the paper transport cable to the finisher.

34
00:07:26.000 --> 00:07:30.999
Attach the connector cover.

35
00:07:31.000 --> 00:07:59.999
At the rear of the printer, remove the lower rear connector
cover, and then insert the finisher cable.

36
00:08:00.000 --> 00:08:03.999
Attach the connector cover.

37
00:08:04.000 --> 00:08:15.999
Connect one end of the power cord to the printer.

38
00:08:16.000 --> 00:08:24.999
To avoid the risk of fire or electrical shock, connect
the other end of the power cord to an appropriately rated and properly grounded electrical outlet.

39
00:08:25.000 --> 00:08:29.999
Open the front door, and then turn on the power switch.

40
00:08:30.000 --> 09:38:30.999
If the display is blank, then press the power button
on the control panel.